Lithuania
We machine moulds, tooling, custom parts and one-off architectural components from EPS, tooling board, MDF, hardwood and other machinable materials. We can work from your existing CAD model or help prepare one for manufacturing. Simultaneous five-axis machining, from a single block to a finished part.
±0.1 mm
Typical machining tolerance
4100 × 2100 × 1000 mm
Working envelope
5 axes
Simultaneous five-axis
€100 / hour
Machine time, from
Material arrives by the pallet and leaves as complex compound curves. Our gantry machine uses a two-axis rotary head enabling full five-axis machining over a bed sized for large foundry patterns, full-height wall panels and other large custom parts — work that most three-axis shops have to turn down.
Simultaneous five-axis machining of sculpted, undercut and compound-curved geometry. Large moulds, tooling, master patterns and custom parts, machined from your CAD model or prepared for manufacture from a drawing or a photo with dimensions.
EPS and PU tooling-board masters for composites, vacuum forming and foundry work. Machined in stages, seam-matched, sanded and sealed to a stable surface your laminators can work straight off.
Send us your CAD model, drawing or a photo with dimensions. We can work directly from your existing model or help prepare and adapt one for machining, including workholding when needed.
One-offs and short runs, from a single custom part to a matched set of curved panels. Sanded, sealed and ready for installation, finishing or moulding, with delivery available where practical.
The images below are shown in two versions: an edited presentation image and the original workshop photo. Switch between them, or hover over an image to compare.
We show each image in two versions — the original workshop photo exactly as taken and an edited presentation version. Drag the handle, or use the arrow keys to compare them.
01 — Sculpted plug form · EPS
02 — Gantry bed · person-scale work envelope
03 — 5-axis gantry mill · machining bay
Straight off the shop floor — unretouched frames
No black boxes. You get a dedicated contact person, a written price and photos at every stage — including the ones that show the mess.
01
Send a CAD model, drawing or a photo with dimensions. We check feasibility, review the geometry, plan workholding and determine the machining approach.
02
You receive a fixed written quote in euros, based on machining time and the overall requirements of the job, with machining rates from €100/hour. Toolpaths and machining strategy are prepared in CAM before machining begins.
03
Parts are machined in roughing, semi-finishing and finishing stages. Large parts can be machined in multiple sections or setups, with each stage accurately aligned to the same reference.
04
Parts can be sanded and filled where needed, then sealed or primed. Wood parts can also be sanded to the required surface quality.
05
Collection from the workshop in Paluknys, or delivery across Lithuania, the Baltics and the rest of Europe by arrangement.
€100/ hour, from
Quoted per job, so you know the number before we start. Machining is billed by the hour; materials, CAD work and finishing are listed separately.
Send us your CAD model, drawing or a photo with dimensions, along with the material and required tolerances. We’ll review the part and determine the best way to manufacture it.